[ Freshour Manufacturing - Daewoo Puma10
[ Lathe Program - written 6-6-2006 by JP
[ This Program is designed to turn threaded
[ plugs 1.250 OAL with .750 inch of thread
[ under the head using 1 3/8 Hex bar.
[ The tool shank stops at start point
[ (3+ inches) away from chuck for a stop.
%
O0750 (THREADDED 1.125 PLUGS)
G20 G90 (INCH, ABSOLUTE)
G92 X-1.500 Z-0.4560 (SET START POINT)
G96 S0400 (CSS 400 FEET PER MINUTE)
G92 S2000 (MAX RPM 2000)
G00 Z0.000 M03 (SPINDLE CCW)
G95 F0.014 M08 (FEED PER R.014, COOLANT ON)
G00 X3.000 Z3.000
T1111 (TRIANGLE TOOL)
G00 X1.380
G00 Z0.200
G01 Z-0.810 (ROUGH TURN CORNERS)
G01 X1.600
G00 Z0.200
G00 X1.310
G01 Z-0.745 (ROUGH 1)
G01 X1.600
G00 Z0.200
G00 X1.245
G01 Z-0.745 (ROUGH 2)
G01 X1.600
G00 Z0.200
G00 X1.180
G01 Z-0.745 (ROUGH 3)
G01 X1.600
G00 Z0.200
G00 X1.120
G01 Z-0.745 (ROUGH 4)
G01 X1.600
G01 Z-0.8125
G01 X1.375
G01 Z-0.750
G01 X1.117 (FACE RING SEAT)
G01 Z-0.710
G01 X1.000 Z-0.662
G01 X1.117 Z-0.604 (TURN TO SIZE)
G01 Z0.200 (TURN TO SIZE)
G00 Z6.000 M09 (COOLANT OFF)
M01 (OPTIONAL STOP)
T1010 (THREAD TOOL)
G97 S1500 (CSS CANCEL, 1500 RPM)
G00 X1.050 M08 (COOLANT ON)
G00 Z0.200 (THREAD 1)
G33 X1.050 Z-0.712 E0.083333
G00 X1.200
G00 Z0.200
G00 X1.025 (THREAD 2)
G33 X1.025 Z-0.712 E0.083333
G00 X1.200
G00 Z0.200
G00 X1.010 (THREAD 3)
G33 X1.010 Z-0.712 E0.083333
G00 X1.200
G00 Z0.200
G00 X1.000 (THREAD 4)
G33 X1.000 Z-0.712 E0.083333
G00 X1.200
G00 Z0.200
G00 X1.000 (THREAD 5)
G33 X1.000 Z-0.712 E0.083333
G00 X1.200
G00 Z0.200
G00 X2.500 M09 (COOLANT OFF)
G00 Z6.000
M01 (OPTIONAL STOP)
T0909 F0.003 (PART OFF TOOL, FEED .003)
G96 S0400 (CSS 400 FEET PER MINUTE)
G92 S1500 M08 (MAX RPM 1500, COOLANT ON)
G00 X1.600
G00 Z-1.250
G01 X-0.050
G00 X1.600 M09 (COOLANT OFF)
G00 Z6.000
T1212 (BAR STOP)
G00 X-1.500 Z0.000 (STOP POSITION)
M05 (SPINDLE STOP)
M30 (PROGRAM END - RESET)
%