[ Frehsour Manufacturing - Cadillac Program
[ 08-08-2005 Revised July 12, 2006 by JP
[ This Program is designed to turn Tapered
[ plugs 3 inches long with 1.250 SE, 1.50
[ LE from 1.50 inch diammeter bar stock.
[ The tool shank is used as a stop for
[ material by stopping at original start
[ point (min. 4 inches) away from chuck.
[ -programmed using back parting tool-
%
O0024 (24D 48L CARBON PLUGS)
G20 G90 (INCH, ABSOLUTE)
G92 X-1.000 Z0.500 (SET STARTING POINT)
G96 S0450 (CSS 450 FEET PER MINUTE)
G92 S1200 M03 (MAX RPM 1200, CCW)
G95 F0.014 M08 (PER REV FEED .014, COOLANT ON)
G00 Z1.000
G00 X0.000
T0202 (SQUARE TOOL #2)
G00 X1.430
G00 Z0.050
G01 X1.560 Z-1.107 (FIRST TAPER)
G00 X1.550
G00 Z0.050
G00 X1.365
G00 Z0.050
G01 X1.560 Z-1.827 (SECOND TAPER)
G00 X1.550
G00 Z0.050
G00 X1.300
G00 Z0.050
G01 X1.560 Z-2.546 (THIRD TAPER)
G00 X1.550
G00 Z0.050
G00 X1.250
G00 Z0.050
G01 X1.560 Z-3.100 (FINAL TAPER)
G00 X1.550
G00 Z-2.975
G00 X1.550
G01 X1.430 Z-3.035 (FIRST CHAMFER)
G01 Z-3.390
G00 X1.550
G00 Z-2.975
G01 X1.360 Z-3.070 (SECOND CHAMFER)
G01 Z-3.300
G00 X1.600
G00 Z1.000 (MOVE AWAY FROM PART)
T0909 F0.003 (BACK PART TOOL, FEED .003)
G96 S0060 (CSS 60 FEET PER MINUTE)
G92 S1200 (MAX RPM 1200)
G00 X-1.600
G00 Z-3.150
G01 X0.035 (PART OFF)
G00 X-1.600
G00 Z0.500
T0202 (BAR STOP POSITION)
S50 M09 (SPEED 50, COOLANT OFF)
G00 Z0.500
G00 X-1.000
M05 (SPINDLE STOP)
M30 (PROGRAM END - RESET)
%