[ Frehsour Manufacturing - Cadillac Lathe Program
[ revised 04-18-2006 by JP. This program is designed
[ to turn Tapered plugs 2.5 inches long with LE=0.750
[ SE=LE-.235 from 1 inch diammeter bar stock. The
[ tool shank is used as a stop for material by
[ stopping at original start point (at least 3.5
[ inches) away from chuck. Iscar Parting Tool
%
O0016 (STAINLESS 1 INCH)
G20 G90 (INCH, ABSOLUTE)
G92 X-1.000 Z0.500 (SET STARTING POINT)
G96 S0400 (CSS 400 FEET PER MINUTE)
G92 S1500 M03 (MAX RPM 1500, CCW)
G95 F0.014 M08 (PER REV FEED .014, COOLANT ON)
G00 Z1.000
G00 X0.000
T0101 (SQUARE TOOL)
G00 X0.930
G00 Z0.050
G01 X1.030 Z-0.944 (FIRST TAPER CUT)
G00 X1.050
G00 Z0.050
G00 X0.865
G00 Z0.050
G01 X1.030 Z-1.558 (SECOND TAPER CUT)
G00 X1.050
G00 Z0.050
G00 X0.800
G00 Z0.050
G01 X1.030 Z-2.172 (THIRD TAPER CUT)
G00 X1.050
G00 Z0.050
G00 X0.760
G00 Z0.050
G01 X1.030 Z-2.550 (FINAL TAPER CUT)
G00 X1.050
G00 Z-2.475
G01 X0.930 Z-2.535 (FIRST CHAMFER)
G01 Z-2.890
G00 X1.050
G00 Z-2.475
G01 X0.860 Z-2.570 (SECOND CHAMFER)
G01 Z-2.800
G00 X1.050
G00 Z1.000 (MOVE AWAY FROM PART)
G92 S0050 (SLOW RPM FOR TOOL CHANGE)
M09
M00 (STOP FOR TOOL CHANGE)
M08
T0505 F0.003 (ISCAR PARTOFF, FEED .003)
G96 S0200 (CSS 200 FEET PER MINUTE)
G92 S0700 (MAX RPM 0700, CCW)
G00 X1.100
G00 Z-2.670
G01 X-0.035 (PART OFF)
G00 X1.100
G00 Z0.500
S50 M09 (SPEED 50, COOLANT OFF)
T0101 (SQUARE TOOL)
G00 Z0.500
G00 X-1.000
M05 (SPINDLE STOP)
M30 (PROGRAM END - RESET)
%